Standards:
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/FX,
IEEE802.3x, IEEE802.3af

Forward and Filtering Rate:
14,880pps for 10Mbps
148,810pps for 100Mbps

Packet Buffer Memory:
1M bits

Processing Type:
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control

Address Table Size:
1024 MAC addresses

Power Input Redundant power inputs:
Terminal Block: 47 - 55VDC
DC Jack: 47 - 55VDC

Power Consumption Device: Max. 10W (without PoE)
PoE power budget (depends on power input):
61.6W Max.

PoE Power Output Port 1 to 4
IEEE802.3af: up to 15.4W/port, 47 - 55VDC, 350mA Max
*Supports overload current protection
*Supports reverse polarity protection

Casing:
Aluminum case
IP30

Dimensions:
62mm (W) x 110mm (D) x 135mm (H)
(2.44" (W) x 4.33" (D) x 5.31" (H))

Weight:
1Kg (2.2lbs.)

Installation:
DIN-Rail (Top hat type 35mm), Panel, Rack Mounting

Ethernet Port:
10/100BASE-TX: 8, 7 or 6 ports
100BASE-FX: 0, 1 or 2 ports

LED Indicators:
Per Unit: Power Status (Power 1, Power 2, Power 3)
Per Port: 10/100TX, 100FX: Link/Activity

Alarm Contact:
One relay output with current 0.1A@24VDC

Operating Temperature:
-10°C to 60°C (14°F to 140°F)
Tested @ -20°C to 70°C (-4°F to 158°F)

Storage Temperature:
-40°C to 85°C (-40°F to 185°F)

Ambient Relative Humidity:
5% to 95% (non-condensing)

Regulatory Approvals:

ISO:
Manufactured in an ISO9001 facility

Safety:
UL508(Pending)

EMI:
FCC Part 15, Class A, VCCI
EN61000-6-3
EN55022
EN61000-3-2
EN61000-3-3

EMS:
EN61000-6-2
EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria B
Air: + / - 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
3V/m, 1400 to 2000MHz; 80% AM Criteria A
1V/m, 2000 to 2700MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A

Environmental Test Compliance:
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10~150Hz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)

EX34080-00Z
8-port 10/100BASE-TX Industrial Unmanaged PoE Ethernet Switch

EX34071-X0Z
7-port 10/100BASE-TX +1-port 100BASE-FX Industrial Unmanaged PoE Ethernet Switch

EX34062-X0Z
6-port 10/100BASE-TX +2-port 100BASE-FX Industrial Unmanaged PoE Ethernet Switch

100FX Fiber Options:
(X) =
1: Multi Mode (SC)-2Km
2: Multi Mode (ST)-2Km
6 : Multi Mode (SC) WDM-TX:1310nm/RX:1550nm-2Km
7 : Multi Mode (SC) WDM-TX:1550nm/RX:1310nm-2Km
8 : Multi Mode (SC) WDM-TX:1310nm/RX:1550nm-5Km
9 : Multi Mode (SC) WDM-TX:1550nm/RX:1310nm-5Km
A : Single Mode (SC)-20Km
B : Single Mode (SC)-40Km
H : Single Mode (ST)-20Km
P : Single Mode (SC) WDM-TX:1310nm/RX:1550nm-20Km
Q : Single Mode (SC) WDM-TX:1550nm/RX:1310nm-20Km
R : Single Mode (SC) WDM-TX:1310nm/RX:1550nm-40Km
S : Single Mode (SC) WDM-TX:1550nm/RX:1310nm-40Km
*More 100FX Fiber options also available upon request.

Power Input Interface:
(Z) =: Terminal Block & DC Jack

Power Supply: (Optional)
*Option A - The Terminal Block type external power supply are not included. Please order the following part numbers,as required: DR-120-48

**Option B - The external power adapter and power cord are not included. Please order the following part numbers,recommend for indoor use, as required: AS-120P-48

Installation Type:
DIN Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480
Optional Rack mount kit, part number: KR-BK43-400