˙16 IEEE802.3at compliant PoE PSE (30W) ports
˙2 Gigabit SFP combo
˙Monitor each port power status thru web interface

Provides 16 10/100Base-TX ports and 2 Gigabit ports

4096 MAC addresses

2.25M bits buffer memory

Supports IEEE802.3at Power over Ethernet (PoE)

Power Sourcing Equipment (PSE)PoE (Power budget Control, PoE status, Port status) through the Web browser Interface

System, IP Configuration, Port-based VLAN, QoS Priority, and load default setting through the Web browser Interface

-40°C to 75°C (-40°F to 167°F) operating temperature range

1000 Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Autonegotiation, Auto-MDI/MDIX

Alarms for power failure by relay output

Supports Rack Mounting installation

Complies with NEMA TS2 Environmental requirements for Traffic control equipment

Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment

Standards
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX/SFP,IEEE802.3x, IEEE802.3ab 1000BASE-T, IEEE802.3af,
IEEE 802.3at, IEEE802.3z 1000BASE-SX/LX

Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
1,488,100pps for 1000Mbps

Packet Buffer Memory
2.25M bits

Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control

Address Table Size
4096 MAC addresses

Power Input
47 - 57VDC

Power Consumption Device: Max. 15W (without PoE)
PoE power budget (depends on power input):
480W Max.

PoE Power Output IEEE 802.3at: up to 30W/port, 50 - 57VDC, 600mA Max.

*Supports reverse polarity protection

Casing
Metal case

Dimensions
Single Power:
442mm (W) x 205mm (D) x 44.2mm (H)
(17.40" (W) x 8.07" (D) x 1.73" (H))

Weight
3Kg (6.61lbs.)

Installation
Rack Mounting

Ethernet Port
10/100 BASE: 16 ports
Gigabit: 2 ports

LED Indicators
Per Unit: Power Status: Power 1, 2 (Green), Fault
Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Amber)
Per Port: Gigabit: Link/Activity (Green) , Speed (Amber)
Per PoE: 10/100TX (Amber)

Operating Temperature
-40°C to 75°C (-40°F to 167°F)

Storage Temperature
-40°C to 85°C (-40°F to 185°F)

Ambient Relative Humidity
5% to 95% (non-condensing)

ISO
Manufactured in an ISO9001 facility

EMI
FCC Part 15, Class A
EN61000-6-4
- EN55022
- EN61000-3-2
- EN61000-3-3

EMS
EN61000-6-2
- EN61000-4-2 (ESD Standards)
Contact: + / - 6KV
Air: + / - 8KV
- EN61000-4-3 (Radiated FRI Standards)
10V/m, 80 to 2.7G; 80% AM
- EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV
D.C. Power Ports: + / - 4KV
- EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line
D.C. Power Ports: + / - 0.5KV; Line-to-Earth
- EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10V @ 0.15 - 80MHz
D.C. Power Ports: 10V @ 0.15 - 80MHz
Earth Ground Ports: 10V @ 0.15 - 80MHz
- EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz

Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)
5G @ 150Hz; Criterion 3 (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25G @ 11ms (Half-Sine Shock Pulse; Operation)
50G @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
FED STD 101C Method 5007.1 (Free fall w/ package)
-Tested with Cross Weight and Drop High standard table

NEMA TS1/2 Environmental requirements for traffic control
equipment

EX49162-0XZ
16-port 10/100BASE-TX + 2-port Gigabit Hardened Web-smart PoE Ethernet Switch

Gigabit Fiber Options :
(X) =
1 : 10/1000/1000BASE-TX
3 : 1000BASE-SX (SC) - 550m
4 : 1000BASE-SX (SC) - 2Km
5 : 1000BASE-SX (ST) - 550m
A : 1000BASE-LX (SC) - 10km
B : 1000BASE-LX (SC) - 20km
R : 1000BASE-BX (SC) WDM-TX: 1310nm/RX1550nm - 20km
S : 1000BASE-BX (SC) WDM-TX: 1550nm/RX1310nm - 20km
V : 1000BASE SFP Combo
*More Gigabit Fiber Options also available upon

Power Input Interface :
(Z) = T : Terminal Block
Power Supply (optional)
*Option A - The Terminal Block type external power supply are not included. Please order the following part numbers, as required: SDR-480-48
Installation Type: Rack mount (mounting kit is included)